EN 
ZH Details
The IBO DRK range are both sides sealed stud type track rollers based on integral tapered roller bearings with robustly designed outer rings for direct running against a mating track. The ready-to-assemble bearing unit is lubricated with a high-performance grease for a lifetime. The defined axial clearance is set when the bearing rings are clamped together axially. DRK track rollers have a wide support base for absorbing the resultant load of radial and axial forces and tipping moments due to the O-arrangement of the specific contact angle. The support base is larger than comparable track rollers based on needle or cylindrical rollers.
We also supply the DRK as a yoke type track roller with axial guidance and bolts for simple fixing on the adjacent construction.
Special bearing
Bearing ring materials
Roller bearing steel (standard)
Roller bearings materials
Roller bearing steel (standard)
Cage materials
Synthetic material
Bearig profiling
The profiling of the exterior cover can be adapted on request to the application to optimise the load Absorption.
Lubrication
The one-side sealed bearings are delivered with grease for a lifetime. The filling level can be adjusted to customer requirements on request.